corporate profile   product guide   contact us   home

FIXING To Metal
in Highly Corrosive Environments
Stainless Steel Teks® Self Drilling Screws

SELECTION GUIDE
Application:   Recommended Screw:
For fixing long-life roofing and
cladding to steel or
aluminium, when protection
from corrosive environments
and or a complete system
compatibility is crucial.

   Hexagon Head Seal Grade 305(A2)
With 16mm Aluminium Bonded Washer





Product Range
Gauge Dimensions Pack Quantity Part Number
12g 12-14x25mm 500 6-397-0103-3
14g 14-14x31mm 500 6-397-0107-7
  14-14x52mm 500 6-397-0108-8
  14-14x70mm 500 6-397-0109-9
  14-14x80mm 500 6-397-0110-1
 


Hexagon Head no seal Grade 305(A2)




10g  10-16x19mm 500 6-392-0001-1
12g 12-14x25mm   500 6-392-0003-3
14g 14-14x31mm   500 6-392-0007-7 
  14-14x52mm   500 6-392-0008-8
  14-14x70mm   500 6-392-0009-9
  14-14x80mm   500 6-392-0010-1
 


Wafer Head no seal Grade 305(A2)




10g   10-16x25mm   500 6-292-0002-2  
*Always check with material supplier for screw selection recommendations.
 



How to Use
  1. Measure the total thickness of the materials to be fastened.
  2. Choose a Stainless Tek® screw long enough to fasten the material being secured to.
  1. Choose the correct driver for the screw being used. Fit the driver to a 550 Watt power screw driver and set tool to no higher than 2500rpm.
  2. Push sharply to create a starting point.
  3. Drive screw home and maintain firm end load pressure until screw has drilled and fastened.



Technical Information
Gauge/TPI Test Materials Pullout Loads Single Shear Strength Axial Tensile Strength Torsional Strength
10-16  2.4mm G450 Steel Purlin   5.0 kN   5.2 kN   8.2 kN   6.3 Nm  
12-14  2.4mm G450 Steel Purlin   5.7 kN   7.2 kN   11.9 kN   10.6 Nm  
14-14  2.4mm G450 Steel Purlin   7.5 kN   9.4 kN   15.7 kN   15.0 Nm  
 



  • INDEX


    • Selection Guide
  • Taptites
  • Type 17's
  • Stitch