| Problem: |
Drill points breaking. |
| |
| Possible Cause: |
- After drilling through one thickness of materials, drillpoint may be crashing forward onto the
second thickness when there is an air-gap in between.
|
| Solution: |
- A longer or extended drill point is recommended where the application involves drilling through one
material, then passing through air, to drill through and fasten into a second steel member.
|
| |
| Possible Cause: |
- Driver is set in reverse mode.
|
| Solution: |
- Change switch to forward position.
|
| |
| Possible Cause: |
|
| Solution: |
- Let the screw do the work.
|
