| Problem: |
Cross recess driver bits breaking or wearing out prematurely. |
| |
| Possible Cause: |
- Torque or depth on screwdriver incorrectly set.
|
| Solution: |
- Re-set to avoid over tightening of the screw, maintain firm pressure setting the screw.
|
| |
| Possible Cause: |
- Incorrect cross recess being used.
|
| Solution: |
- Replace with correct type of driver bit. (Phillips)
|
| |
| Possible Cause: |
- Incorrect tool being used.
|
| Solution: |
|
