Pullout Data - Type 17 and Chipboard Screws in Timber (Newtons)

Product SizeChipboard or PlywoodF7 Pine TimberF17 HardwoodF27 Ultra HardwoodRe-Roofing Timber
8-10 Chipboard Screws   Data on request Not Applicable Not Applicable Not Applicable
8-15 Type 17 Data on request     Not Applicable Not Applicable
10-12 Type 17 - 23 mm Embedment Data on request 3,800 5,200 Not Applicable Not Applicable
12-11 Type 17 - 23 mm Embedment Data on request 2,400 3,300 Data on request Not Applicable
12-11 Type 17 - 35 mm Embedment Data on request 3,900 6460 Data on request Not Applicable
14-10 Type 17 - 23 mm Embedment Data on request 3,820 6,980 Data on request Data on request
14-10 Type 17 - 35 mm Embedment Data on request 3,820 6,980 Data on request Data on request
M6 Dec-King Timber Screw - 31.5 mm Embedment Data on request 1,675 2,210 Not Applicable Not Applicable
12-11 BattenZips - 35 mm Embedment Data on request 5,710 6,460 6,960 Data on request
10-18 Fibre Teks - 16 mm Embedment Data on request 1,850 Not Applicable Not Applicable Not Applicable

All values are averages obtained under laboratory conditions and appropriate safety factors should be applied for design purposes. These figures are applicable to product sourced from ITW Buildex© and with the Buildex© Head Mark only.

ITW Buildex© a Division of ITW Australia Pty Ltd.ACN 004 235 036 ABN 63 004 235 063 Whilst every care was taken in preparation of this guide, Buildex© accepts no responsibility for the accuracy of the information supplied. Copyright 2017. The contents of this site are the exclusive copyright of Buildex© and may not be reproduced without written permission