Pullout Data - Zips in Timber and Metal (Newtons)

Product Size and ApplicationF7 Pine TimberF17 HardwoodF27 Ultra HardwoodRe-Roofing Timber
M6 -11 RoofZips - 23 mm Embedment into Timber 2,864 4,380 Not Applicable Not Applicable
M6 -11 RoofZips - 35 mm Embedment into Timber 4,300 6,570 Not Applicable Not Applicable
14-12 CyclonicfZips - 25 mm Embedment into Timber 5,610 6,280 7,920 Data on request
14-14 Hex Head PolyZips - 35 mm Embedment into Timber 4,300 6,750 Not Applicable Not Applicable
12-11 BattenZips - 35 mm Embedment 3,900 6460 Data on request Not Applicable
10-16 Hex Head RippleZips - 23 mm Embedment 3,800 5,200 Not Applicable Not Applicable
10-16 Designer Head - 23 mm Embedment 3,800 5,200 Not Applicable Not Applicable
Product Size and Application0.55mm G550 Batten0.75mm G550 Batten1.00mm G550 Batten1.20mm G550 Batten
M6 -11 RoofZips - Into Light Weight Batten 1,520 2,480 Data on request 3,280
14-12 CyclonicfZips - Into Light Weight Batten 1,625 2,716 3,500 3,240
14-14 Hex Head PolyZips - Into Light Weight Batten 1,520 2,480 Data on request 3,280
12-11 BattenZips - Into Light Weight Batten 1,520 2,420 Data on request 2,680
10-16 Hex Head RippleZips - Into Light Weight Batten Data on request Data on request 2,800 3,500
10-16 Designer Head - Into Light Weight Batten Data on request Data on request 2,800 3,500
Product Size and Application1.5mm G450 Purlin1.9mm G450 Purlin2.4mm G450 Purlind3.2mm G450 Purlin
M6 -11 RoofZips - Into Purlin        
14-12 CyclonicfZips - Into Purlin Not Applicable Not Applicable Not Applicable Not Applicable
14-14 Hex Head PolyZips - Into Purlin Not Applicable Not Applicable Not Applicable Not Applicable
12-11 BattenZips - Into Purlin Not Applicable Not Applicable Not Applicable Not Applicable
10-16 Hex Head RippleZips - Into Purlin 4,300 5,800 8,300 9,500
10-16 Designer Head - Into Purlin 4,300 5,800 8,300 9,500
         

All values are averages obtained under laboratory conditions and appropriate safety factors should be applied for design purposes. These figures are applicable to product sourced from ITW Buildex© and with the Buildex© Head Mark only.

ITW Buildex© a Division of ITW Australia Pty Ltd.ACN 004 235 036 ABN 63 004 235 063 Whilst every care was taken in preparation of this guide, Buildex© accepts no responsibility for the accuracy of the information supplied. Copyright 2017. The contents of this site are the exclusive copyright of Buildex© and may not be reproduced without written permission